Fast Fixes for Common Gutter Problems

5.24.2010

Maintaining gutters is the most important thing you can do to prevent water from damaging your house, and keeping them in shape is an easy homeowner task.

Gutters are designed to do one thing—channel water away from the foundation—and they’re critical to protecting the structural integrity of your house. But in order for gutters to do their job properly, they have to be kept in shape and free of clogs, holes, and sags.

Luckily, most common gutter problems are easy for homeowners to fix themselves. And it’s worth the effort. “Gutters are one of those things where routine maintenance and inspecting them can really prevent bigger problems down the road,” says Jason Stutzman, director of home maintenance and repair for Brothers Redevelopment in Denver.

Here are the gutter problems that the pros see most often, and the recommended solutions:

Clogged gutters: 
This is the most common problem of all. Left untended, gutters and downspouts get so clogged with debris that they’re rendered useless. The excess weight of leaves, twigs, and standing water can also make them sag and pull away from the fascia.

Clean them at least once a year, and twice a year if you have a lot of trees nearby. Gary Mindlin, managing partner of New York City-based Top Hat Home Services, schedules gutter maintenance four times a year, with additional checks after big storms.

You can clean your own gutters if you’re comfortable on a ladder, don’t mind getting wet and dirty, and don’t have an extremely tall house. After you’ve cleared the muck, flush them with a garden hose to make sure they’re flowing properly. If you’d prefer, you can hire someone to do the job for you for between $50 and $250, depending on the size of your house.

Another option for dealing with chronically clogged gutters is to outfit them with gutter covers. These include mesh screens, clip-on grates, and porous foam. They still need regular maintenance, though, and the cost can be more than the gutters themselves.

Sagging gutters and gutters pulling away from the house: 
This is usually a problem with the hangers, the hardware that secures the gutters to the fascia. They might have deteriorated over time, the fasteners may have backed out of the wood, or they’re spaced too far apart to support the weight of full gutters. The cost to fix it yourself is cheap; hangers generally cost $10 or less apiece, and the fasteners run about $1 each. 

Keep your gutters free of debris:

  •  Buy a gutter scoop ($4 to $7 at the hardware store).
  • While it's raining, check gutters for leaks.
  • Check that water runs freely through downspouts.
  • Make sure downspout extenders are securely attached.

 

Leaks and holes:
Leaky gutter joints can be sealed by caulking the joint from the inside with gutter sealant, says John Eggenberger, vice president of training and corporate development for the Mr. Handyman franchise of home repair companies. 

A tube costs about $5. Very small holes can be filled with gutter sealant. Larger holes will require a patch. If you can’t find a gutter patching kit at the hardware store, you can make a patch from metal flashing.

Improperly pitched gutters: 
Gutters need to be pitched toward the downspouts for the water to flow properly. You want at least a quarter inch of slope for every 10 feet. Get on a ladder after a rainstorm and look in the gutter; if there’s standing water, it’s not pitched properly.

To correct this yourself, you’ll need to measure from the peak to the downspout. Snap a chalk line between the two and find the spots where the gutter is out of alignment. You might be able to push it up into place by bending the hanger.

If that doesn’t solve the problem, you might need to take a section down and rehang it. If you have seamless gutters, call the company that installed them to correct the problem.

Downspouts draining too close to the foundation:
Downspouts need to extend several feet from the house, or they’ll dump right into the basement. Gutter extensions attached to the bottom of the downspout will discharge water well beyond the foundation. They’re inexpensive and easy to install. “I like the downspout material extended four or five feet and screwed on,” says Reggie Marston, president of Residential Equity Management Home Inspections in Springfield, Va. Cost: less than $20 per downspout.

Missing gutters
If your house has no gutters at all, consider investing in a system. The cost depends on the material. Most residential gutters are aluminum, which is lightweight and durable. “Unless an aluminum gutter is damaged by something, it will last forever,” says Scott McCurdy, vice president of Jacksonville, Fla.,-based disaster repair contractor Coastal Reconstruction. Vinyl, galvanized steel, and copper also are available options.Aluminum gutters range from about $4.50 to $8.50 per linear foot installed. On a 2,000-square-foot house with about 180 linear feet of gutters, that’s roughly $800 to $1,500.Serial remodeler Pat Curry is a former senior editor at  BUILDER, the official magazine of the National Association of Home Builders, and a frequent contributor to real estate and home-building publications.

Foundation Inspection A simple check of your foundation prevents expensive repairs later: Check soil around the foundation for proper grading.
  • Repair minor foundation cracks with silicone caulk or epoxy putty.
  • Sight down your foundation wall to check for straightness.
Consult a structural engineer for advice on foundation repairs
 

Posted by Just Ask Madeline at 1/6/2012 5:46 PM
Categories: General Info, Home Improvement
Tags: gutters routine maintenance fascia leaky
 

What did you think of this article?




Trackbacks
Trackback specific URL for this post
  • No trackbacks exist for this post.
Comments
Display comments as (Linear | Threaded)

Leave a comment

Submitted comments are subject to moderation before being displayed.

 Name

 Email (will not be published)

 Website

Your comment is 0 characters limited to 3000 characters.